We’ve collected the new iPhone update issues for years since the iOS 9 release. And in this post, we’ve listed 29 most common iPhone update issues.
This guide shares the most common iPhone iPad update issues for iOS 9. But it does not always apply since the latest iOS version is iOS 12. Here we collected the latest iPhone update problems people may meet while updating to the iOS 12, and you may would like to know, And we also gives you some potential solutions to these problems and bugs in this post.
You know, the latest iOS 12 has been released, and more than 25 percent users already have been upgraded. Besides, there are still more than 50% people are using iOS 11. If your iPhone iPad is running with the iOS 11, you can refer to iOS 11 problems to know the latest iPhone iOS issues. And we also provided the iOS 10 problem list for iOS 10 users.
Must Read: Should I Update My iPhone/iPad to iOS 12 >
To help you make a smooth upgrade and stay away from all kinds of iPhone iPad update issues, here in this article we collect the most common iOS 9 problems and solutions. No matter what version you are working with, like iOS 9, iOS 9.2.1, iOS 9.3.3, iOS 9.3.4 or the last iOS 9 update – iOS 9.3.5, if you have any problem when or after update, be free to check this guide and find solutions to fix. Hope it is helpful to you.
If you tried to download iOS 9 as soon as it was released, you may encounter problems downloading and installing it in the minutes. This is a common problem and many users suffered the same problem when downloaded iOS 8 last year. So if this happens with iOS 9, you shouldn’t feel like you’re alone. You probably found that the downloading takes hours, or perhaps you even saw an error message that says the Software Update Failed.
To avoid these problems, we recommend you wait for a day or two to download iOS 9 on your device. This because the rush will have died down in few days and there might be some initial bugs that weren’t noticed in the beta version. Or you can try again with these methods mentioned in this guide – How to Fix Software Update Failed Error, like, updating with iTunes, upgrade with IPSW file, etc.
Even Apple revealed at WWDC that iOS 9 will only be about 1.3GB in size, it can still be a tough task for many 8/16 GB iPhone or iPad users to free up that much space, especially if they’re not syncing to iTunes to manage storage manually. The good news is that iOS 9 will allow users to temporarily delete apps in order to complete the OS update. And after the upgrade is over, all deleted apps will be automatically replaced.
Besides that, there are also some simple & effective solutions to help you make more room for iOS 9, like remove messages & attachments all at once, clear the junk files on iPhone iPad with PhoneClean, or move photos & videos to computer then delete them from your device etc.
This is a common and annoying problem that when we try to update to the new OS, the iPhone is more likely to be stuck on Apple logo and can’t boot up completely. If your iPhone or iPad stays on Apple logo screen during iOS 9 update, you can try the following methods to fix it:
Solution 1: Reboot your iPhone iPad. Hold and Press Home & Power button for 10 seconds to reboot your iPhone.
Solution 2: Put your iPhone iPad in Recovery Mode.
Solution 3: Get more solutions by visiting this guide: How to Fix iPhone iPad Stuck on Apple Logo >
Note: This is the simplest way to get your iPhone out of the Apple logo. But what if you have some important data that hasn’t been backed up? Or you’re getting errors during the recovery mode? The safest way to keep your iPhone data safe during iOS 9 update is to make a full backup of your iPhone iPad. To keep copies of the whole iPhone/iPad content on computer in a viewable format, you can try an iTunes alternative like AnyTrans to transfer photos, videos, songs, messages, notes, contacts, voice memos, and more to computer.
Cellular data issue after iOS upgrade is also extremely common. We have seen a few iPhone users complain about the Cellular issue, it is not working after iOS 9 update, but there is no problem with Wi-Fi connection. There are some potential solutions for you.
Generally speaking, there are two common ways to upgrade to iOS 9: update with iTunes or OTA (Over the Air). OTA is the easiest and fastest way to update, that’s why many people perform the update in Settings > General > Software Update. However, we’ve heard that things are freezing before they finish. Some people also complain that their iPhone stuck on verifying update and it seems the update will never be finished.
How to fix iPhone iPad stuck on verifying update screen? Here are several possible solutions you can try:
Solution 1: Lock and wake your iDevice using power button.
Solution 2: Do a hard rest or hard reboot.
Solution 3: Restore your iPhone iPad with iTunes.
Solution 4: Try to update iOS software again with iTunes.
For detailed steps, you can visit this guide: How to Fix: iPhone iPad stuck on verifying update during iOS update >
Your iPhone may get into recovery mode or stuck on connect to iTunes logo due to various reasons, and iOS 9 update could be one of the most common causes.
Follow the steps to get out of iTunes logo if you stuck in Recovery Mode when upgrading to the newest iOS 9. Before start, make sure you have installed the latest version of iTunes: Open iTunes and click Help in the main menu > Select Check for Updates > Download the latest iTunes version to continue.
Step 1. Hold both the Home and Sleep/Wake buttons down for a minimum of 10 seconds, or until the device turns off.
Step 2. Push the Sleep/Wake button again to turn on your iPhone. If your iPhone is not in Recovery Mode, the problem is resolved. If it still sticks, continue to step 3.
Step 3. Launch iTunes and connect the iPhone to your computer. You should see a notification in iTunes says that iTunes has detected an iPhone in Recovery Mode. Click Ok.
Step 4. Click the device icon on the left side of the iTunes window, and select the “Summary” tab.
Step 5. Click the “Restore” button.
After trying the steps above, if your iPhone iPad is still stuck on Recovery Mode, you can visit this guide that offers a new solution – using some iOS repair tool.
Quite a lot of people have been talking about Wi-Fi problem after updating devices to iOS 9. It is not the first time iPhone users are running into Wi-Fi issues. You can try to fix Wi-Fi issues on your iOS 9 devices by following workarounds.
If you still fail to fix the problem you are stuck on, you can check this guide that offers several solutions to “can’t connect to Wi-Fi”, “iPhone iPad keeps dropping Wi-Fi”, “Wi-Fi gray out”, etc.
The Bluetooth issues after iOS 9 update doesn’t affect everyone, but it absolutely causing troubles to quite a few. For example, some people have trouble connecting the iPhone to the in-car Bluetooth systems, or Bluetooth suddenly disconnecting when a call comes in, or sometimes the connection drops frequently.
Check the compatibility list of iOS 9 you will find that iPhone 4s and iPad 2 are also supported by iOS 9. However, not all iOS 9 features will be available for them. In the meantime, users of older iPhone and iPad may be looking for ways to speed up their iPhone/iPad running iOS 9. If are really feeling that iOS 9 is slowing down of time on your old device, there are a couple of fixes you can take to speed up your iOS 9.
The new “Low Power Mode” of iOS 9 lets you extend your battery life to some degree. It can be programmed to activate when the battery reaches 20%, or manually at any time. For many users the iOS 9 battery life is very good, but few users report iOS 9 battery life darning fast. Here are some quick tips to extend iOS 9 battery life.
Updating to new OS is never out of rick, and a large number of people suffered data loss during iOS 9 update, say, update fails, device goes to recovery mode, or data deletion for more update space.
Luckily, there is still possibility to get lost data back. If you have created backup via iTunes or iCloud before downloading iOS, you can try restoring your device. If not, some professional iOS data recovery like PhoneRescue for iOS can do you a big favor, it helps directly recover lost data from device without help. For more details, you can refer to How to Recover Data After iOS Update.
A handful of users report they fail to send iMessages or it takes a long time to finish. This doesn’t happen to everyone, but it certainly causes headaches to few people. With a limited text plan, this can be really frustrating.
A few iOS 9 users report that their iPhone or iPad displays wrong time. There are three quick fixes to solve this problem. Hope one of them works for you.
Re-Install the App: If the app keeps crashing when you launch it, you’d better remove it and re-download it from the App Store.
Some users report in Macrumors Forum that they are unable to activate iMessage and FaceTime on iPhone 6.
I previously had the iOS 9.1 beta on my phone, but reverted back to the public release of iOS 9. Since downgrading today I’ve had this problem. I checked Apple’s status page and all services appear to be functioning properly and Google searches have come up dry, leading me to believe that this is a problem on my end.
Make sure that you have connected to cellular data or Wi-Fi network. If you’re using an iPhone, you’ll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that you’ve set up your time zone correctly.
Turn off iMessage and FaceTime and restart your iPhone iPad: Go to Settings > Messages and turn off iMessage (Go to Settings > FaceTime and turn off FaceTime) > Restart your device > Turn iMessage and FaceTime back on.
Get more solutions to fix iMessage “Waiting for Activation” error by visiting this guide:
A few users complain that they lost notification sound with incoming calls, texts, emails, FaceTime, games and other apps. This problem happens on both iPhone an iPad – notification sounds not working.
iPhones and iPads can freeze completely, especially when you update your device to a new system, say, iOS 9. Lots of users meet the problem of iPhone won’t turn on when performing iOS 9 update. Try the fixes below:
If you still fail to turn on your iPhone iPad after iOS update, you can read this guide to find more solutions and fix it.
As Apple reclaims the Low Power Mode of iOS 9 lets you have 1 hour of additional time before charging, and this new feature lets you extend your battery life. Yes, iPhone users can enable Low Power Mode in: Settings > Battery > Turn on Low Power Mode. However, the iPad users notice that there is NO Low Power Mode in Setting on their iPad.
Actually, this is not an iOS 9 bug or something, it’s just because this feature is only available on iPhones. We also thought that this is mostly because that iPhones struggle much more with battery life than iPads. So, if you have updated your iPad to iOS 9 and found no Low Power Mode on it, don’t be panic, it is possible that Apple will add this feature to iPad in the following updates.
You May Like: Top Tips for Saving Battery Life for iPhone iPad >
Some users reported, to avoid surging crowds, they tried to upgrade their iPhone or iPad with iTunes instead of Over The Air, but only to find their iPhone/iPad is stuck on contacting the iPhone(or iPad) software update server, and then a window pops up and says “The iPhone software update sever could not be contacted“.
If you are also stuck on this problem when upgrading to iOS 9, here are possible solutions below:
Solution 1: Check if your iTunes is the current version – 12.3, if not, upgrade your iTunes to the latest version. Check for Update via iTunes is very slow, so you can download from Apple.com directly.
Solution 2: Disconnect your iPhone from computer and quit iTunes, then reopen and reconnect.
Solution 3: Ensure your network is fast and stable. If you are using any Virtual Private Network, turn it off, and try again. I just made it by this way.
iOS 9 stuck on the ” Slide to Upgrade” screen is a common iOS 9 updating problem among iPhone users. We have seen a lot of people facing this problem:
I was rather happy with iOS 7 so never upgraded to 8 – but then 9 has just come out so I decided I would finally update my iPhone for the battery enhancements. Updated it via iTunes and the install seemed to go well, however, I’m now stuck on the slide to upgrade screen and my phone is just unresponsive – it won’t slide! It comes up the first time and it works, I enable location services and Wi-Fi, but then the slide message comes up again and it doesn’t work.
— harpreet0singh from Apple Support Communities
Just did the apple ios9 update on my iPhone 5c. The update downloaded and installed and I got to the ‘hello’ screen, slide there and then the next screen which says ‘slide to upgrade’ doesn’t react and slide, it’s just stuck there, frozen! Please help!! Anyone else have this problem?
— Deepat from PC Advisor Forum
Here we collect some potential fixes for this problem:
Some users asked in Reddit that the app icons don’t show up when they try to update apps in the App Store. This is happening in iOS 9.0.2 and iOS 9.1 Beta. The app icons just look blank. Here are some possible fixes for you:
If you are also stuck on other App store not working problems, like “Update All” button not working, or can’t download Apps, etc, try to fix them by visiting this guide: How to Fix iOS 10 Apple Store Not Working After Update >
If you open Safari on iOS 9.2.1 and tap on the search/address bar, the browser crashes instantly to the home screen. Verified this on 3 different iPhone units, 2 iPhone 6 and 1 iPhone 6S Plus, all updeted to the last iOS version, so is definitely an iOS 9.2.1 bug. If you open a “private mode” tab, the browser works just fine. All the iPhones affected I’ve tried, are running iOS with language set on Italian. Have you seen this bug? Solutions? Clearing history/cache doesn’t seem to resolve the issue. Thanks! – Ruiner75 from Apple Support Communities
Just like the user from Apple Support Community, if you also are stuck on the same problem, here we offer you a solution:
On your iDevice, go to Settings > Safari > Tap on Safari Suggestion and Search Engine Suggestion to turn them off.
If you also have the same problem on your Mac, you can follow steps below to fix:
Launch Safari > Click Preferences on top left corner of your Mac > Click Search tab > Uncheck Include search engine suggestions and Include Safari Suggestions.
View more iPhone iPad update issues – Safari problems, and their solutions, please click here to read full text >
Recently, on Twitter and Reddit, some iPhone users complained that when using their iPhone in below freezing temperatures, their iPhone’s battery drain fast even if it is fully charged, even it shut itself down as if its battery is completely drained.
Visiting the Apple Support – Keeping iPhone, iPad and iPod touch within acceptable operating temperatures, it says, Use iOS devices where the ambient temperature is between 0º and 35º C (32º to 95º F), and store the device where the temperature is between -20º and 45º C (-4º to 113º F). And also mentions, using an iOS device in very cold conditions outside of its operating range may temporarily shorten battery life and could cause the device to turn off. Battery life will return to normal when the device is brought back to higher ambient temperatures.
According to this Apple support, if you are using your iPhone in below freezing temperatures, and its battery drain very fast, or turns itself off. It is normal. All you need to do is taking your iPhone back to the higher ambient temperature, and haven’t any practical tips for solving this problem. To avoid this problem, but, here we offer you 3 protective tips as below:
1. Turn off your iPhone in the cold if you don’t need your iPhone at time
If you are walking outside, and don’t need your iPhone, turn it off instead of put it to sleep. Because when you turn it off, the iPhone can withstand a much greater temperature range. Just like we mentioned above, iPhone can be stored in where the temperature is between -20º and 45º C (-4º to 113º F). And when you return to a warmer environment, don’t turn on your iPhone at once. It needs some time to get warm, or it may cause damage.
2. Keep your iPhone warm outside
If it is very cold outside, you must be wearing warm clothing, so you can put your iPhone in an inside pocket or between your body heat and the jacket’s insulation. Naturally, your iDevice can remain within operational temperatures. At this moment, you can control your iPhone with headphones and dictate a command by activating Siri.
3. Use a high-tech thermal protection case
You know, there are some high-tech thermal protection cases that are made to make your iPhone can function well in extremely cold weather in the market. You just need to select one among them:
You May Like: Top 15 Tips to Extend iPhone’s Battery >
With these wonderful functions added to iOS 9.3, while for most of iDevice users, their favorite is Night Shift, which automatically shift the colors temperature of an iOS device’s display to offer them a better night rest. Just like Apple says, studies have shown that exposure to bright blue light in the evening can affect circadian rhythms and make it harder to fall asleep. While this better sleep is not supported in every iDevice can enjoy, here we make a complete list of supported iPhone, iPad and iPod:
According to the list above, if you are working with an iPhone 5 or iPhone 4s or older iPhone, you can’t enjoy the Night Shift feature. If your device is in the supported list, here we offer you a bonus tip about how to use or activate Night Shift as below:
Step 1: Run Settings App.
Step 2: Scroll to the Display & Brightness, and tap on it.
Step 3: Tap on Night Shift.
Step 4: Tap on Manually Enable Until Tomorrow, adjust screen temperature as you like.
Many users report that they can’t activate their iPhone or iPad after upgrading to iOS 9.3. If you are stuck on some situation, here are some possible solutions you can try:
Solution 1: If you see the Messages “Cannot activate because activation server is temporarily not available”, you just need to try again later. It may be that the Apple’s activation server has shut down because of high demand.
Solution 2: Try to restart your iDevice: Press and hold the power and home buttons for 10 seconds until the Apple logo appears.
Solution 3: After restarting, if you still can’t activate your iPhone or iPad, you can connect your iDevice to computer, and upgrade again with iTunes. About how to upgrade to new iOS version via iTunes, you can follow this guide: How to Update Your iPhone iPad to iOS 9 >
Solution 4: If you still fail to activate your iPhone or iPad after iOS 9.3 update after trying solution 2, you can make a complete restore of your device with iTunes. About how to restore your iPhone iPad with iTunes, please refer to this guide: How to Backup and Restore iPhone iPad with iTunes >
Important note: Make a full backup of your iPhone or iPad before performing a restore.
Step 1: Turn off your iDevice firstly.
Step 2: Visit iCloud.com and log in with your Apple ID and password.
Step 3: Select Find iPhone > Input the password of your Apple ID to confirm > Click All Devices on the top > Select the Device which can’t be activated > Click Remove from Account > Click Remove again when note window pops up.
Step 4: Turn on your iPhone or iPad, and then activate it again.
Also Read: How to Fix: Fail to Activate iPhone iPad After iOS Update >
Recently many users complained that they couldn’t open links in Safari, Messages, Email and other apps on their iPhone iPad running with iOS 9.3. Even some users working with iOS 9.2.1 also have the same problem. Although what caused this problems are unknown, and Apple also didn’t released any solution, here we collect some possible solutions from Apple Support Community and other tech sites. They are worked for some users, although we can’t ensure they are also worked for you, it is worthy of having a try:
After setting up Safari, if you still can’t open links in Safari on your iDevice, you can try to also make this setup on your iPhone iPad: Settings > Safari > Open Links > Select Background. Silimarly, this also only works for Safari, and Message and mail still freezes when clicking on hyperlinks.
Solution 2: Force reboot your iPhone iPad.
Hold down the Power button and Home button until the Apple logo appears to force reboot your iDevice, this also may help you get out.
Solution 3: Clearing the history and Cache of Safari.
Steps to remove caches and history from Safari on your iPhone iPad: Go to Settings > Safari > Advanced > Website Data > Remove All Website Data.
If you want to remove all the history, caches and cookies from Safari on your iPhone iPad, you can follow this guide: How to Clear Safari History, Cookies and Junks on iPhone iPad >
Solution 4: Replace Safari with Other Browser like Chrome, Firefox, etc.
Solution 5: Change Search Engine from Google to Bing
Some people say changing use Bing to search is worked for them. You can try to change the search engine of your iPhone iPad’s Safari with steps below:
Go to Settings > Safari > Search Engine > Select Bing (the fault selection is Google).
Solution 6: Downgrade iOS 9.3 to iOS 9.2.1
After trying all the solutions above, if you still fail to open links in Safari, Messages and Mail on your iPhone iPad, and this has seriously influenced your life and work, you can choose to downgrade to iOS 9.2.1. After all, Apple is still signing the iOS 9.2.1, and you can get a way to restore to the last iOS version.
About how to downgrade iOS 9.3 to iOS 9.2.1, you can follow this step-by-step guide: How to Downgrade to iOS 9.2.1 from iOS 9.3 >
If you have a 9.7-inch iPad Pro and you haven’t yet updated to iOS 9.3.2, you might want to do it later. Some iPad Pro users are suffering an “Error 56” message when upgrading, and finding their devices bricked. Apple has admitted this bug:
“We’re looking into a small number of reports that some iPad units are receiving an error when updating the software. Those unable to restore their device through iTunes should contact Apple support.”
As we know there is no immediate workaround to fix the problem, but you can try:
Also Read: How to Fix iTunes Error 9 >
These above solutions are just some of possible fixes for iOS 9 problems. If it is not working, you’d better to visit your nearest Apple Store to get the professional help from Apple Specialist. Absolutely, you also can leave a comment to tell your iOS 9 problems or issues, and we’d like to reply to you and offer you help. If you get some other workarounds for the mentioned problems, don’t forget to write them here so that it can help more people. For old iOS 8 users, we provide you the Most Common iOS 8 Problems & Solutions guide to help you out.
If you just get a fire-new iPhone 6s or iPhone 6s Plus, even a new iPad Pro, here are some helpful guides you may like:
Product-related questions? Contact Our Support Team to Get Quick Solution >