Download AnyTrans for Android to Start Your Excellent Transferring Experience!

Download Now

How to Use AnyTrans for Android

Welcome to AnyTrans for Android online guide. Here you can find all detailed tutorials about how to use AnyTrans for Android to export, import as well as delete data on your Android phone. If you still have questions after reading this guide, please do not hesitate to contact our Support Team, and you will receive solution within 24 hours.

Import Media Files to Device with One-Click

With Add Content function, AnyTrans for Android can help you import all music, photos and videos files to your phone with one-click. Please follow the guide below to do that.

Step 1: Preparations.

Do as following:
  • Run AnyTrans for Android on your computer
  • Connect your Android device via USB cable to computer

If you do not connect your device or your device is not recognized, you will see the interface:

No Device Connection

Once your device is recognized, you will see the loading page with "(Your device) is connecting". The time to load data may vary based on the size of your data. Please wait for the loading process.

Connecting Device

If AnyTrans for Android fails to recognize your phone,you may try these troubleshooting steps to solve this problem.

① Check if you have installed required Drives.

② Choose MTP mode on your device to connect.

③ Check whether your USB cable is loose. If it is, please reconnect it. If USB cable is broken, please give new one a try.

④ If problem persists, please contact our Support Team for further diagnosis.

Step 2: Selection.

Do as following:
  • Click Add Content button (1)
  • Add files (2) from computer to your phone

AnyTrans for Android will load your data and show the Home page automatically after the device is connected successfully.

1 Click Media Transferring to Android

After clicking "Add Content", a folder will pop up to ask you to add data from your computer. You may select all music, photos, and videos at the same time.

Add Content from Computer

Step 3: Transferring.

Do as following:
  • Click OK (3) to start the transferring process
  • Wait for the transferring process

The transferring process starts automatically after clicking OK.

Please do not disconnect your device during the transferring process. If you want to cancel the transferring, please click button (4) from the upper right corner of the processing window.

Add Content to Device

Once transferring process completes, you will see the Complete screen.

Transferring Completes

Ask for Help or Contribute to This Guide