How to Use ADB Commands to Bypass FRP/Google Account [Full Guide]

Factory Reset Protection (FRP) is an important security feature introduced by Google for Android devices. It acts as a shield, preventing unauthorized device access after a factory reset. Thus, ensuring your data remains secure even if your device is misplaced.

But what if you’re the legitimate owner and find yourself locked out due to FRP? This is where the ADB FRP bypass method comes in. This detailed guide discusses ADB commands to bypass FRP or Google Account verification. So offering you a pathway to regaining control over your device.

What Is ADB FRP Bypass?

ADB (Android Debug Bridge) is a command-line tool that allows communication between your computer and Android device.  ADB FRP bypass refers to using ADB commands to remove the Google account verification step. Only devices with USB debugging enabled can be accessed by ADB commands. Incorrect commands or disabled debugging will prevent bypassing FRP and can cause system errors.

How to Use ADB Commands to Remove FRP Lock

ADB stands for Android Debug Bridge, a utility tool that allows you to communicate with your device from your computer. You can send actions and commands from your computer. And those will be performed directly on your Android device.

There are specific unlock commands that you can use with the ADB FRP bypass tool. So you can get rid of the FRP lock from your device. The following steps will help you to bypass FRP the ADB command.

Step 1. Download ADB
Download the ADB installer package to your computer.

Step 2. Extract Files
Extract the toolkit files into a folder on your PC.

Step 3. Install Drivers
Run adb.set.exe and type Y to install the ADB and Fastboot drivers when prompted.

 

Step 4. Complete Driver Installation
Type Y again if requested to finish driver installation. The command window will close when the process completes.

Step 5. Prepare Your Device
Power on the Android device and connect it to your PC via USB. Make sure USB debugging is enabled on the device.

Step 6. Open Command Window in ADB Folder
Hold Shift and right-click inside the ADB folder, then choose Open command window here (or similar option).

Step 7. Samsung devices (ADB commands)
In the Command Prompt, enter the following ADB lines one by one, pressing Enter after each:

• adb shell am start -n com.google.android.gsf.login/
• adb shell am start -n com.google.android.gsf.login.LoginActivity
• adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1

Step 8. Other Android brands
For non‑Samsung devices, use the following command (as provided):

• adb shell content insert –uri content://settings/secure –bind
• name:s:user_setup_complete –bind value:s:1

 

Following these steps will remove the FRP lock from your device. However, before starting with this method, look at the limitations of ADB FRP bypass.

Can ADB Really Bypass FRP? Limitations of ADB FRP Bypass

I tried to remove FRP using ADB sideload, but it says ‘device unauthorized’. Can I still bypass it?

This is a common situation: users get stuck because they didn’t enable USB debugging or failed to authorize the computer beforehand.  

The ADB command is a workable solution for removing the FRP lock on your Android phone. The drawback is that this method is quite complicated. Further, you need to have technical knowledge of ADB and its workings. The following are the limitations associated with this method:

• Cause Unexpected Issues: The method involves commands. Any single error in typing the command can cause some major issues. Therefore, you need to be very cautious. Otherwise, you may end up damaging your device.
• Require Technical Knowledge: You can’t proceed with the ADB FRP bypass method if you don’t know how ADB works. Still, if you want to continue this process, you must learn how ADB works. Without learning it, you won’t be able to bypass the FRP lock of your Android device.
• Driver Issues: You may also encounter driver issues. If your device is not detected, it happens when proper drivers are not installed.
• Not User-friendly: ADB FRP bypass method is a technical process aimed toward the geeks. Therefore, the overall process is complicated. In short, the method is not user-friendly.
• No Guarantee: You can try the ADB method to remove the FRP lock from your Android device. However, the method is not guaranteed to unlock your device successfully.

After knowing the complexity of the ADB method to bypass FRP lock, you may look for an alternative method. So, let’s discuss another tool to bypass the FRP lock.

Best Alternative to ADB FRP Bypass – DroidKit-Secure & Easy

Are you looking for an easy tool for FRP bypass? DroidKit – Android Phone Toolkit might be the answer you are searching for. It is a powerful all-in-one solution specially designed for Android devices. This amazing tool helps bypass FRP locks, unlock locked devices, manage/transfer/recover Android data, etc. It also fixes known and unknown system issues.

Compared with ADB, DroidKit has a much simpler interface and easier operation. Even if you are not a tech-savvy, you can easily use this tool to bypass FRP without a Google account and password. And you don’t need to worry about compatibility issues, because DroidKit supports Android 6 and above system versions. This means you can even use it to bypass FRP locks on the latest Android devices. Below are some highlights of DroidKit in bypassing FRP lock.

• Customized FRP bypass solution – DroidKit provides you with customized FRP bypass solutions based on the device brand and Android system version, meeting your needs as much as possible.
• Solution for non-techies – You don’t need to have any technical knowledge. You can easily bypass FRP with some simple clicks.
• Support multiple devices – DroidKit supports removing FRP lock on Samsung, Xiaomi, Redmi, POCO, and OPPO. And it runs well on both Windows and Mac.
• Security guarantee – DroidKit will never leak your privacy and data to anyone else. Your devices will also stay safe and sound.

Before starting, free download and install DroidKit on your computer. Then follow the steps to bypass FRP.

Step 1. Launch DroidKit on your computer once the installation is done. Choose FRP Bypass mode from the menu.

Step 2. Connect your device to the computer and click the Start button as you see the below interface.

Step 3. Then select your device brand accordingly. After that, it will start preparing the configuration file for your device. Click on the Start to Bypass button when it is completed.

Step 4. Select your Android system version and click on Next.

Step 5. Now follow the on-screen guide to complete some settings on your device.

Step 6. DroidKit will start bypassing FRP lock on your device. You will see the below interface as the process completes.

FAQs about ADB FRP Bypass

Q1. Can you bypass FRP with ADB commands?
Only if USB debugging was enabled and the PC was authorized. Otherwise, ADB cannot bypass FRP.

Q2. What are the ADB commands to remove a Google account?
Commands like adb shell pm remove-user 0 can sometimes work. Misuse may cause system errors.

Q3. Does ADB sideload remove FRP lock?
Sideload can help in some cases, but it requires sideload mode to be enabled and compatible scripts.

Q4. Why is my device not showing in ADB when trying FRP bypass?
Common reasons: USB debugging not enabled, device not authorized, or missing drivers.

Q5. If ADB does not work, what alternatives are there?
Use FRP bypass tools, Google account recovery, or professional unlocking services.

The Bottom Line

ADB FRP bypass offers a technical route to unlock Android devices. While it’s powerful, it comes with challenges. For those seeking simpler solutions, tools like DroidKit offer a user-friendly alternative, so you can free download DroidKit to have a try. Remember, understanding your tools ensures safe and effective device management. So equip yourself with the right knowledge and tool and make unlocking effortless!