It is a terrible problem that your iPhone stuck in a boot loop. You must worry about whether your phone works again because there are many important data on your phone. So it is important for you to know how to fix an iPhone boot loop.
Do you know? If your iPhone has the following phenomena, for example, the Apple logo on the iPhone display lasts for a few seconds, then suddenly disappears and reiterates. This means that your iPhone has suffered the common problem of getting stuck in the boot loop. Honestly, this is very bad because your iPhone will continuously restart and cannot be usable. But, don’t worry! You are so lucky to find this article which can provide you some solutions to solve this problem. Please continue reading the following content.
We should not only pay attention to how to fix the problem of iPhone stuck in the boot loop, but also point out why your iPhone will suffer this problem. This is an important premise, so we can try to avoid this kind of problem from happening again. There are common reasons why the iPhone stuck in the boot loop:
iPhone Stuck in Boot Loop
After getting the reasons for iPhone stuck in boot loop, you may attach importance in the solutions. There are methods that can help you solve this problem.
AnyFix is designed to make every effort to ensure you can fix the 130+ system problems on your iPhone, iPad, iPod touch, or Apple TV, like stuck on Apple Logo, iPhone won’t turn on, the device won’t charge, etc., and the success rate is the highest ever. Since the product launches, it has received a lot of praise. AnyFix has helped many people solve their problems. So you can have a try without any hesitation.
Please refer to the detailed guide to make good use of AnyFix.
Step 1. Free Download AnyFix from our official website on your computer and launch it.
Step 2. Then, connect your iPhone to the computer with USB cables.
Step 3. Click the “System Repair ”option.
Click on System Repair
Step 4. Choose the category of iPhone problems as the picture shows.
Choose iPhone Problems and Start Now
Step 5. Now choose the “Standard Repair” mode. As you can see, AnyFix provides three repair modes to ensure that you can fix your problems.
Choose Standard Repair
Step 6. For this step, AnyFix can check your iPhone model. And you need to click the “Download ”button to get a matching firmware.
Download the Firmware
Step 7. When download firmware completed, you can click the “Fix Now” button.
Firmware Download Completed
Step 8. Please put your iPhone in recovery mode to let AnyFix repair. Then this tool will automatically start repairing as the below picture shows.
Repairing the System
Step 9. When you see the completed page as follows, it means that the recovery process is completed.
System Repair Completed
If you think AnyFix is great please do not hesitate to Download the Free Trial to have an experience with the free features. AnyFix provides positive results and wins good feedbacks from users when it comes to fixing iOS-related problems.
Free Download * 100% Clean & Safe
You may encounter the boot loop while trying to update iOS by using an old version iTunes. What you need to do is to check if an iTunes update is available. Please refer to the following steps to update iTunes to a new version:
Open iTunes and click “Help” and “Check for Updates” and then follow the instruction to install the newest version.
Check for Updates
This is a common way when your iPhone has a problem, but it may not always take effect.
Force Restart Methods of Different Models iPhone
For the different model of iPhone you need to hold different keys at the same time:
You can repair system problems by putting your iPhone into the recovery mode. But it should be noted that entering the recovery mode will result in the loss of device data, so please make sure that you have backed up the data in the device before starting to enter the recovery mode.
Enter Recovery Mode
Step 1. Please turn your iPhone off.
Step 2. Open one computer with iTunes and connect one end of the USB cable to the computer. Make sure the iTunes program is not running.
Step 3. The different models iPhone follow different steps:
Step 4. Please keep holding the Side/ Volume Down/ or Home button until the iTunes logo appears. It means that your phone is now in Recovery Mode.
Step 5. Then you will see a window pops up in iTunes offering to let you Update or Restore the phone. Please click Update to resolve the problem.
If none of the above methods helped you fix the problem, then we suggest you go to the Apple after-sales center to check whether the phone hardware has a problem. It is necessary to judge whether the hardware is damaged since any improper hardware changes will cause the device to malfunction.
Check iPhone Internal Hardware
Is this article helpful to you? If you have fixed your problem by using the methods in this article, we hope you can share it with your friends and families who suffer such issues. And we hope this article can help more people. If you have any other problem with the iOS system, please do not hesitate to leave a message in the comment area to let us know.
Product-related questions? Contact Our Support Team to Get Quick Solution >